Delta 14-070 Manual de instrucciones descargar pdf (Pagina 15)

3. The table can be tilted right or left by pulling out and

removing table alignment pin (C) Fig. 20, and loosening table lock-

ing bolt (D). NOTE: If pin (C) is difficult to remove, turn nut (E) clock-

wise to pull pin out of casting. Tilt table to the desired angle and

tighten bolt (D).

4. When returning table to the level position, replace table

alignment pin (C) Fig. 21. This will automatically position the table

surface at 90 degrees to the spindle. Then tighten bolt (D).

5. A tilt scale (E) Fig. 22, is provided on the table bracket

casting to indicate the degree of tilt. A witness line (F) is also pro-

vided on the table to line up with scale (E).

Fig. 20

Fig. 21

Fig. 22

1 2 ... 10 11 12 13 14 15 16 17 18

Sin comentarios

Delta 14-070 Manual de instrucciones Pagina 15